SpeedTouch Installation

Please see our Important Notice, we recommend that you read it before you proceed.

Make sure the hardware is not connected at this point.
Also note that you may need your Windows 98 CD during the installation.

Place the installation CD into the CD drive, the installation will auto-run.

Click Install usb/330 software.

The install wizard perpares to install the software.

Information screen, click Next.

Read the licence carefully, if you agree, click Yes.
If you do not agree, click No and terminate the installation.

Select the directory to install to. If you wish to use the default directory click Next.
If you wish to install to a different directory, click the Browse button and navigate to the relevant directory, click Next

Select a program folder, click Next.

The installation will now continue.

The setup is now complete, click Finish.
You can now connect the hardware to your computer.

Windows 98 finds the new hardware.
You may need your Windows 98 CD Rom.

Enter Details:
Connection: Select the SpeedTouch Connection from the drop down list.
Username: This is in the form hostname@connection pipe
An example of this would be: myhostname@anchor-r26a.demonadsl.co.uk
This information will be in your welcome letter.
Password: This will be your connection password you set when setting up the account.
Once this information is entered, click the Connect button.

Providing all the information has been entered correctly the modem will connect to Demon.

IMPORTANT NOTICE

These walkthroughs have been provided only in order to assist you and are intended for use in conjunction with your computer and the AST 330. These walkthroughs are available for use at the user's own risk and we accepts no liability whatsoever for any loss you may incur arising out of your use of these walkthroughs. You expressly accept this by following the walkthroughs. If you have difficulty following these walkthroughs, please contact our customer support service on the number given below.

IMPORTANT NOTICE

Back to top